Simple dumb CCIP bombing

1. A/G mode on, Master Arm on
2. STRS page
3. Select 82 (Mk82 slick here)
4. Toggle switch below MFD to CIP (CCIP)
5. Fusing toggle N IN or T IN
6. Toggle Qty to total qty dropped
7. Toggle Mult to # of pylons used. (Qty 2, Mult 2 will drop 1 pair)
8. Toggle Interval (in feet) if desired. 
9. Make sure ALT is set to RDR and not BARO (below UFC)
10. PUC can be set to pullup altitude
11. Press ALT on UFC, set radar alt to ON, Bomb and GPS selected.\
12. Quick press pickle to create a target point and slave DMT to the reticle.
13. *optional press cage/uncage to change from CCIP to AUTO mode. 


CCRP release using target pod to designate

0. Set laser code before startup, DMT on R MFD to CODE when in air. 

1. Go through steps 1-11 but set step 4 to AUTO not CIP. 
2. Right MFD select TPOD then STBY (to make it OPER)
3. Press NWS to unselect any target. 
4. Press SS Down (topdown) twice quickly to set TPOD targeting mode on R MFD
5. Press NWS till SNWPLW mode on R MFD. Choose CCD or FLIR on R MFD
6. Press SS Aft short to choose AR/PT/MT (MT for moving, PT for vehicle, AR for building)
7. Press SAFE to ARMED on R MFD (top Left) then press till LASR (2nd from top R)
8. Use TDC stick slew to find target. Depress TDC stick to lock. 


Find Buddy target with TPOD

1. Get their code, on R MFD, DMT>CODE>enter code on UFC
2. Double tap SS Down to get TPOD as active sensor
3. Hit NWS till TPOD is in SLV VV mode
4. On R MFD hold "INR" for >1s to change it to LSS (should be boxed)
5. Once TPOD finds the lased target hit SS AFT short, use TDC select on target
6 (unsure) on L MFD hit WP Increment button for >1s to transfer target to T0 (target point 0) 

alternate to try? 

1. Have TPOD tuned to right laser code, have it locked on ground near target area.
2. SSS-Left (long) will start laser tracking and then lock 


Mav E2/L firing

1. SSS Aft (long?) get R MFD up on the LSS page and push CODE on upper L of that MFD. Enter code in UFC.
2. On L MFD go to Stores, select LMAV make sure same code is entered.
3. Activate Tpod, double press SSS dn to make active, slew to find target, TDC dn to select.
4. IMPORTANT - long press SSS fwd, Lmav should come up on R MFD, press cage/uncage x should sweep hud
5. Arm the laser, designate lasr in R MFD, fire laser when within 10nm and Mav will lock. (Square over hud tgt)
6. At 6.5nm or less, pickle.

Mav F (IR) firing w/ TPOD

1. Tpod on R MFD, 2xSSS press make active+slew
2. TDC slew to find target, depress to designate
3. IMPORTANT - 2xSSS press THEN select IRMV on stores again
4. Cage/uncage mav
5. SSS forward to IRMAV slew mode with TDC, lock w TDC, fire w pickle
6. FOR FOLLOW up shots, cage/uncage then SSS Fwd to IRMav, let it lock, fire.